# Trac 設定ファイル

Trac の設定は <projectenv>/conf/ にある trac.ini というファイルを編集して行います。変更した内容は通常、即座に反映されますが、 [components] セクションや [logging] セクションへの変更では Web サーバを再起動する必要があります。また、グローバルな設定ファイルを新しく作成した直後も Web サーバを再起動しなければなりません。

trac.ini 設定ファイルとそのファイルのあるディレクトリは Web サーバから書き込み可能でなければなりません。 Trac は現在のところ、キャッシュを破棄するために完全に Environment を再読み込みするトリガーとして利用しています。

## グローバルな設定

0.11 より前のバージョンでは、グローバルな設定ファイルは $prefix/share/trac/conf/trac.ini/etc/trac/trac.ini などディストリビューションに依存した特定の位置に配置されていました。アップグレードする場合は、設定を継承するファイルを明示しなければなりません。以前のバージョンから 0.11 にアップグレードした場合、プロジェクトの trac.ini ファイルに [inherit] セクションを追加しなければなりません。カスタマイズしたテンプレートや画像のファイルは$prefix/share/trac/... から他の場所に移動することもできます。

グローバルな設定は Environment 固有の設定とマージされます。ローカルの設定はグローバルの設定を上書きます。グローバルな設定ファイルは以下のように指定します:

[inherit]
file = /path/to/global/trac.ini


カンマ区切りにすることで、複数のファイルを指定することができます。

Note: 新しいプロジェクトを作る時に trac-admininitenv コマンドに --inherit=/path/to/global/trac.ini オプションを追加することで、グローバル設定ファイルを指定することができます。オプションを追加せずにプロジェクトを作成した場合でも、新しく作成された conf/trac.ini ファイルを編集して、グローバルファイルの設定で上書きしたいエントリを削除すれば、新しい Environment でグローバル設定ファイルを使用することができます。

[inherit] セクションには、共有するテンプレートの配置先を指す templates_dir と、共有するプラグインを指す plugins_dir という二つのエントリもあります。これらがグローバル設定ファイルに指定することができます。この場合、他の [inherit] file が指定されていれば、設定ファイルは順次読み込まれます。

TracEnvironmenttemplates/ ディレクトリ内のテンプレートは、 [inherit] templates_dir で見つかるテンプレートより優先されます。次に、[inherit] templates_dir のテンプレートはインストールされているテンプレートより優先されます。これらを設定するには注意が必要です。特に、デフォルトのテンプレートをオーバーライドする場合、 Trac を新しいバージョンにアップデートする際には必ず変更点を再読み込みして下さい。 ( TracInterfaceCustomization を行うために推奨する方法は、適切に ITemplateStreamFilter の変更が行えるカスタムプラグインを作成することです。)

## リファレンス

### [account-manager]

 account_changes_notify_addresses List of email addresses that get notified of user changes, ie, new user, password change and delete user. (no default) allow_delete_account Allow users to delete their own account. true auth_init Launch an initial Trac authentication setup. true cookie_refresh_pct Persistent sessions randomly get a new session cookie ID with likelihood in percent per work hour given here (zero equals to never) to decrease vulnerability of long-lasting sessions. 10 db_htdigest_realm Realm to select relevant htdigest db entries (no default) environ_auth_overwrite Whether environment variable REMOTE_USER should get overwritten after processing login form input. Otherwise it will only be set, if unset at the time of authentication. true force_passwd_change Force the user to change password when it's reset. true generated_password_length Length of the randomly-generated passwords created when resetting the password for an account. 8 htdigest_file Path relative to Trac environment or full host machine path to password file (no default) htdigest_realm Realm to select relevant htdigest file entries (no default) login_opt_list Set to True, to switch login page style showing alternative actions in a single listing together. false notify_actions Comma separated list of actions to notify of. Available actions 'new', 'change', 'delete'. (no default) password_store Ordered list of password stores, queried in turn. (no default) persistent_sessions Allow the user to be remembered across sessions without needing to re-authenticate. This is, user checks a "Remember Me" checkbox and, next time he visits the site, he'll be remembered. false refresh_passwd Re-set passwords on successful authentication. This is most useful to move users to a new password store or enforce new store configuration (i.e. changed hash type), but should be disabled/unset otherwise. false register_basic_question A question to ask instead of the standard prompt, to which the value of register_basic_token is the answer. Setting to empty string (default value) keeps the standard prompt. (no default) register_basic_token A string required as input to pass verification. (no default) register_check Ordered list of IAccountRegistrationInspector's to use for registration checks. BasicCheck, EmailCheck, BotTrapCheck, RegExpCheck, UsernamePermCheck reset_password Set to False, if there is no email system setup. true username_char_blacklist Always exclude some special characters from usernames. This is enforced upon new user registration. :[]

### [attachment]

 max_size Maximum allowed file size (in bytes) for ticket and wiki attachments. 262144 max_zip_size Maximum allowed total size (in bytes) for an attachment list to be downloadable as a .zip. Set this to -1 to disable download as .zip. (since 1.0) 2097152 render_unsafe_content Whether attachments should be rendered in the browser, or only made downloadable. Pretty much any file may be interpreted as HTML by the browser, which allows a malicious user to attach a file containing cross-site scripting attacks. For public sites where anonymous users can create attachments it is recommended to leave this option disabled (which is the default). false

### [authz_policy]

 authz_file Location of authz policy configuration file. (no default)

### [browser]

 color_scale Enable colorization of the age column. This uses the same color scale as the source code annotation: blue is older, red is newer. (since 0.11) true downloadable_paths List of repository paths that can be downloaded. Leave the option empty if you want to disable all downloads, otherwise set it to a comma-separated list of authorized paths (those paths are glob patterns, i.e. "*" can be used as a wild card) (since 0.10) /trunk, /branches/*, /tags/* hide_properties Comma-separated list of version control properties to hide from the repository browser. (since 0.9) svk:merge intermediate_color (r,g,b) color triple to use for the color corresponding to the intermediate color, if two linear interpolations are used for the color scale (see intermediate_point). If not set, the intermediate color between oldest_color and newest_color will be used. (since 0.11) (no default) intermediate_point If set to a value between 0 and 1 (exclusive), this will be the point chosen to set the intermediate_color for interpolating the color value. (since 0.11) (no default) newest_color (r,g,b) color triple to use for the color corresponding to the newest color, for the color scale used in blame or the browser age column if color_scale is enabled. (since 0.11) (255, 136, 136) oldest_color (r,g,b) color triple to use for the color corresponding to the oldest color, for the color scale used in blame or the browser age column if color_scale is enabled. (since 0.11) (136, 136, 255) oneliner_properties Comma-separated list of version control properties to render as oneliner wiki content in the repository browser. (since 0.11) trac:summary render_unsafe_content Whether raw files should be rendered in the browser, or only made downloadable. Pretty much any file may be interpreted as HTML by the browser, which allows a malicious user to create a file containing cross-site scripting attacks. For open repositories where anyone can check-in a file, it is recommended to leave this option disabled (which is the default). false wiki_properties Comma-separated list of version control properties to render as wiki content in the repository browser. (since 0.11) trac:description

### [changeset]

 max_diff_bytes Maximum total size in bytes of the modified files (their old size plus their new size) for which the changeset view will attempt to show the diffs inlined (since 0.10). 10000000 max_diff_files Maximum number of modified files for which the changeset view will attempt to show the diffs inlined (since 0.10). 0 wiki_format_messages Whether wiki formatting should be applied to changeset messages. If this option is disabled, changeset messages will be rendered as pre-formatted text. true

### [components]

This section is used to enable or disable components provided by plugins, as well as by Trac itself. The component to enable/disable is specified via the name of the option. Whether its enabled is determined by the option value; setting the value to enabled or on will enable the component, any other value (typically disabled or off) will disable the component.

The option name is either the fully qualified name of the components or the module/package prefix of the component. The former enables/disables a specific component, while the latter enables/disables any component in the specified package/module.

Consider the following configuration snippet:

[components]
trac.ticket.report.ReportModule = disabled


The first option tells Trac to disable the report module. The second option instructs Trac to enable all components in the webadmin package. Note that the trailing wildcard is required for module/package matching.

To view the list of active components, go to the Plugins page on About Trac (requires CONFIG_VIEW permissions).

### [graphviz]

 cache_dir The directory that will be used to cache the generated images. Note that if different than the default (gvcache), this directory must exist. If not given as an absolute path, the path will be relative to the files directory within the Trac environment's directory. gvcache cache_manager If this entry exists and set to true in the configuration file, then the cache management logic will be invoked and the cache_max_size, cache_min_size, cache_max_count and cache_min_count must be defined. false cache_max_count The maximum number of files that the cache should contain. This is the high watermark for the directory entry count. 2000 cache_max_size The maximum size in bytes that the cache should consume. This is the high watermark for disk space used. 10485760 cache_min_count The minimum number of files that the cache should contain. This is the low watermark for the directory entry count. 1500 cache_min_size When cleaning out the cache, remove files until this size in bytes is used by the cache. This is the low watermark for disk space used. 5242880 cmd_path Full path to the directory where the graphviz programs are located. If not specified, the default is /usr/bin on Linux, C:\Program Files\ATT\Graphviz\bin on Windows and /usr/local/bin on FreeBSD 6. (no default) default_graph_dpi Default dpi setting for graphviz, used during SVG to PNG rasterization. 96 encoding The encoding which should be used for communicating with Graphviz (should match -Gcharset if given). utf-8 out_format Graph output format. Valid formats are: png, jpg, svg, svgz, gif. If not specified, the default is png. This setting can be overrided on a per-graph basis. png png_antialias If this entry exists in the configuration file, then PNG outputs will be antialiased. Note that this requires rsvg to be installed. false processor Graphviz default processor. Valid processors are: dot, neato, twopi, fdp, circo. If not specified, the default is dot. This setting can be overrided on a per-graph basis. GraphvizMacro will verify that the default processor is installed and will not work if it is missing. All other processors are optional. If any of the other processors are missing, a warning message will be sent to the trac log and GraphvizMacro will continue to work. dot rsvg_path Full path to the rsvg program (including the filename). The default is /rsvg. (no default)

### [header_logo]

 alt Alternative text for the header logo. (trac.ini の [header_logo] セクションを設定してください) height Height of the header logo image in pixels. -1 link URL to link to, from the header logo. (no default) src URL of the image to use as header logo. It can be absolute, server relative or relative. If relative, it is relative to one of the /chrome locations: site/your-logo.png if your-logo.png is located in the htdocs folder within your TracEnvironment; common/your-logo.png if your-logo.png is located in the folder mapped to the htdocs_location URL. Only specifying your-logo.png is equivalent to the latter. site/your_project_logo.png width Width of the header logo image in pixels. -1

### [inherit]

 htdocs_dir Path to the shared htdocs directory. Static resources in that directory are mapped to /chrome/shared under the environment URL, in addition to common and site locations. This can be useful in site.html for common interface customization of multiple Trac environments. (since 1.0) (no default) plugins_dir Path to the shared plugins directory. Plugins in that directory are loaded in addition to those in the directory of the environment plugins, with this one taking precedence. (since 0.11) (no default) templates_dir Path to the shared templates directory. Templates in that directory are loaded in addition to those in the environments templates directory, but the latter take precedence. (since 0.11) (no default)

### [intertrac]

This section configures InterTrac prefixes. Options in this section whose name contain a "." define aspects of the InterTrac prefix corresponding to the option name up to the ".". Options whose name don't contain a "." define an alias.

The .url is mandatory and is used for locating the other Trac. This can be a relative URL in case that Trac environment is located on the same server.

The .title information is used for providing a useful tooltip when moving the cursor over an InterTrac link.

The .compat option can be used to activate or disable a compatibility mode:

• If the targeted Trac is running a version below 0.10 (r3526 to be precise), then it doesn't know how to dispatch an InterTrac link, and it's up to the local Trac to prepare the correct link. Not all links will work that way, but the most common do. This is called the compatibility mode, and is true by default.
• If you know that the remote Trac knows how to dispatch InterTrac links, you can explicitly disable this compatibility mode and then any TracLinks can become InterTrac links.

Example configuration:

[intertrac]
# -- Example of setting up an alias:
t = trac

# -- Link to an external Trac:
trac.title = Edgewall's Trac for Trac
trac.url = http://trac.edgewall.org


### [interwiki]

Every option in the [interwiki] section defines one InterWiki prefix. The option name defines the prefix. The option value defines the URL, optionally followed by a description separated from the URL by whitespace. Parametric URLs are supported as well.

Example:

[interwiki]
MeatBall = http://www.usemod.com/cgi-bin/mb.pl?
PEP = http://www.python.org/peps/pep-$1.html Python Enhancement Proposal$1
tsvn = tsvn: Interact with TortoiseSvn


### [logging]

 log_file If log_type is file, this should be a path to the log-file. Relative paths are resolved relative to the log directory of the environment. trac.log log_format Custom logging format. If nothing is set, the following will be used: Trac[$(module)s]$(levelname)s: $(message)s In addition to regular key names supported by the Python logger library (see ​http://docs.python.org/library/logging.html), one could use: -$(path)s the path for the current environment - $(basename)s the last path component of the current environment -$(project)s the project name Note the usage of $(...)s instead of %(...)s as the latter form would be interpreted by the ConfigParser? itself. Example: ($(thread)d) Trac[$(basename)s:$(module)s] $(levelname)s:$(message)s (since 0.10.5) (no default) log_level Level of verbosity in log. Should be one of (CRITICAL, ERROR, WARN, INFO, DEBUG). DEBUG log_type Logging facility to use. Should be one of (none, file, stderr, syslog, winlog). none

### [milestone]

 stats_provider Name of the component implementing ITicketGroupStatsProvider, which is used to collect statistics on groups of tickets for display in the milestone views. DefaultTicketGroupStatsProvider

### [milestone-groups]

As the workflow for tickets is now configurable, there can be many ticket states, and simply displaying closed tickets vs. all the others is maybe not appropriate in all cases. This section enables one to easily create groups of states that will be shown in different colors in the milestone progress bar.

Note that the groups can only be based on the ticket status, nothing else. In particular, it's not possible to distinguish between different closed tickets based on the resolution.

Example configuration with three groups, closed, new and active (the default only has closed and active):

# the 'closed' group correspond to the 'closed' tickets
closed = closed

# .order: sequence number in the progress bar
closed.order = 0

# .query_args: optional parameters for the corresponding
#              query.  In this example, the changes from the
#              default are two additional columns ('created' and
#              'modified'), and sorting is done on 'created'.
closed.query_args = group=resolution,order=time,col=id,col=summary,col=owner,col=type,col=priority,col=component,col=severity,col=time,col=changetime

# .overall_completion: indicates groups that count for overall
#                      completion percentage
closed.overall_completion = true

new = new
new.order = 1
new.css_class = new
new.label = new

# Note: one catch-all group for other statuses is allowed
active = *
active.order = 2

# .css_class: CSS class for this interval
active.css_class = open

# .label: displayed label for this group
active.label = in progress


The definition consists in a comma-separated list of accepted status. Also, '*' means any status and could be used to associate all remaining states to one catch-all group.

The CSS class can be one of: new (yellow), open (no color) or closed (green). Other styles can easily be added using custom CSS rule: table.progress td.<class> { background: <color> } to a site/style.css file for example.

(since 0.11)

### [mimeviewer]

 max_preview_size Maximum file size for HTML preview. (since 0.9) 262144 mime_map List of additional MIME types and keyword mappings. Mappings are comma-separated, and for each MIME type, there's a colon (":") separated list of associated keywords or file extensions. (since 0.10) text/x-dylan:dylan, text/x-idl:ice, text/x-ada:ads:adb mime_map_patterns List of additional MIME types associated to filename patterns. Mappings are comma-separated, and each mapping consists of a MIME type and a Python regexp used for matching filenames, separated by a colon (":"). (since 1.0) text/plain:README|INSTALL|COPYING.* tab_width Displayed tab width in file preview. (since 0.9) 8 treat_as_binary Comma-separated list of MIME types that should be treated as binary data. (since 0.11.5) application/octet-stream, application/pdf, application/postscript, application/msword,application/rtf,

### [notification]

 admit_domains Comma-separated list of domains that should be considered as valid for email addresses (such as localdomain). (no default) always_notify_owner Always send notifications to the ticket owner (since 0.9). false always_notify_reporter Always send notifications to any address in the reporter field. false always_notify_updater Always send notifications to the person who causes the ticket property change and to any previous updater of that ticket. true ambiguous_char_width Which width of ambiguous characters (e.g. 'single' or 'double') should be used in the table of notification mail. If 'single', the same width as characters in US-ASCII. This is expected by most users. If 'double', twice the width of US-ASCII characters. This is expected by CJK users. (since 0.12.2) single batch_subject_template Like ticket_subject_template but for batch modifications. By default, the template is $prefix Batch modify:$tickets_descr. (since 1.0) $prefix Batch modify:$tickets_descr email_sender Name of the component implementing IEmailSender. This component is used by the notification system to send emails. Trac currently provides SmtpEmailSender for connecting to an SMTP server, and SendmailEmailSender for running a sendmail-compatible executable. (since 0.12) SmtpEmailSender ignore_domains Comma-separated list of domains that should not be considered part of email addresses (for usernames with Kerberos domains). (no default) mime_encoding Specifies the MIME encoding scheme for emails. Valid options are 'base64' for Base64 encoding, 'qp' for Quoted-Printable, and 'none' for no encoding, in which case mails will be sent as 7bit if the content is all ASCII, or 8bit otherwise. (since 0.10) none sendmail_path Path to the sendmail executable. The sendmail program must accept the -i and -f options. (since 0.12) sendmail smtp_always_bcc Email address(es) to always send notifications to, addresses do not appear publicly (Bcc:). (since 0.10) (no default) smtp_always_cc Email address(es) to always send notifications to, addresses can be seen by all recipients (Cc:). (no default) smtp_default_domain Default host/domain to append to address that do not specify one. (no default) smtp_enabled Enable email notification. false smtp_from Sender address to use in notification emails. trac@localhost smtp_from_author Use the action author as the sender of notification emails. (since 1.0) false smtp_from_name Sender name to use in notification emails. (no default) smtp_password Password for SMTP server. (since 0.9) (no default) smtp_port SMTP server port to use for email notification. 25 smtp_replyto Reply-To address to use in notification emails. trac@localhost smtp_server SMTP server hostname to use for email notifications. localhost smtp_subject_prefix Text to prepend to subject line of notification emails. If the setting is not defined, then the [$project_name] prefix. If no prefix is desired, then specifying an empty option will disable it. (since 0.10.1) __default__ smtp_user Username for SMTP server. (since 0.9) (no default) ticket_subject_template A Genshi text template snippet used to get the notification subject. By default, the subject template is$prefix #$ticket.id:$summary. $prefix being the value of the smtp_subject_prefix option. (since 0.11) $prefix #$ticket.id:$summary use_public_cc Recipients can see email addresses of other CC'ed recipients. If this option is disabled (the default), recipients are put on BCC. (since 0.10) false use_short_addr Permit email address without a host/domain (i.e. username only). The SMTP server should accept those addresses, and either append a FQDN or use local delivery. (since 0.10) false use_tls Use SSL/TLS to send notifications over SMTP. (since 0.10) false

### [pdfredirector]

 extensions List of extensions to redirect on pdf

### [project]

 admin E-Mail address of the project's administrator. (no default) admin_trac_url Base URL of a Trac instance where errors in this Trac should be reported. This can be an absolute or relative URL, or '.' to reference this Trac instance. An empty value will disable the reporting buttons. (since 0.11.3) . descr Short description of the project. My example project footer Page footer text (right-aligned). Visit the Trac open source project at
http://trac.edgewall.org/ icon URL of the icon of the project. common/trac.ico name Name of the project. My Project url URL of the main project web site, usually the website in which the base_url resides. This is used in notification e-mails. (no default)

### [query]

 default_anonymous_query The default query for anonymous users. The query is either in query language syntax, or a URL query string starting with ? as used in query: Trac links. (since 0.11.2) status!=closed&cc~=$USER default_query The default query for authenticated users. The query is either in query language syntax, or a URL query string starting with ? as used in query: Trac links. (since 0.11.2) status!=closed&owner=$USER items_per_page Number of tickets displayed per page in ticket queries, by default (since 0.11) 100 ticketlink_query The base query to be used when linkifying values of ticket fields. The query is a URL query string starting with ? as used in query: Trac links. (since 0.12) ?status=!closed

### [report]

 items_per_page Number of tickets displayed per page in ticket reports, by default (since 0.11) 100 items_per_page_rss Number of tickets displayed in the rss feeds for reports (since 0.11) 0

### [repositories]

One of the alternatives for registering new repositories is to populate the [repositories] section of the trac.ini.

This is especially suited for setting up convenience aliases, short-lived repositories, or during the initial phases of an installation.

See TracRepositoryAdmin for details about the format adopted for this section and the rest of that page for the other alternatives.

(since 0.12)

### [revisionlog]

 default_log_limit Default value for the limit argument in the TracRevisionLog. (since 0.11) 100 graph_colors Comma-separated list of colors to use for the TracRevisionLog graph display. (since 1.0) #cc0, #0c0, #0cc, #00c, #c0c, #c00

### [roadmap]

 stats_provider Name of the component implementing ITicketGroupStatsProvider, which is used to collect statistics on groups of tickets for display in the roadmap views. DefaultTicketGroupStatsProvider

### [search]

 default_disabled_filters Specifies which search filters should be disabled by default on the search page. This will also restrict the filters for the quick search function. The filter names defined by default components are: wiki, ticket, milestone and changeset. For plugins, look for their implementation of the ISearchSource interface, in the get_search_filters() method, the first member of returned tuple. Once disabled, search filters can still be manually enabled by the user on the search page. (since 0.12) (no default) min_query_length Minimum length of query string allowed when performing a search. 3

### [sqlite]

 extensions Paths to sqlite extensions, relative to Trac environment's directory or absolute. (since 0.12) (no default)

### [svn]

 branches Comma separated list of paths categorized as branches. If a path ends with '*', then all the directory entries found below that path will be included. Example: /trunk, /branches/*, /projectAlpha/trunk, /sandbox/* trunk, branches/* tags Comma separated list of paths categorized as tags. If a path ends with '*', then all the directory entries found below that path will be included. Example: /tags/*, /projectAlpha/tags/A-1.0, /projectAlpha/tags/A-v1.1 tags/*

### [svn:externals]

The TracBrowser for Subversion can interpret the svn:externals property of folders. By default, it only turns the URLs into links as Trac can't browse remote repositories.

However, if you have another Trac instance (or an other repository browser like ViewVC) configured to browse the target repository, then you can instruct Trac which other repository browser to use for which external URL. This mapping is done in the [svn:externals] section of the TracIni.

Example:

[svn:externals]
1 = svn://server/repos1                       http://trac/proj1/browser/$path?rev=$rev
2 = svn://server/repos2                       http://trac/proj2/browser/$path?rev=$rev

### [tracmath]


### [versioncontrol]

 allowed_repository_dir_prefixes Comma-separated list of allowed prefixes for repository directories when adding and editing repositories in the repository admin panel. If the list is empty, all repository directories are allowed. (since 0.12.1) (no default)

### [wiki]

 ignore_missing_pages Enable/disable highlighting CamelCase links to missing pages (since 0.9). false max_size Maximum allowed wiki page size in bytes. (since 0.11.2) 262144 render_unsafe_content Enable/disable the use of unsafe HTML tags such as