LAN/GPIBゲートウェイ使用例
Keithleyの例とほとんど同じなので、要点のみ
LAN/GPIBの先にAgilent製の周波数カウンタ(Agilent 53181A)をGPIBアドレス22で接続した場合を例に挙げる。
作業ディレクトリ作成
pfrproc2:~ % mkdir /users/obina/epics/app/AG53181A pfrproc2:~ % cd /users/obina/epics/app/AG53181A pfrproc2:AG53181A % makeBaseApp.pl -t ioc AG53181A pfrproc2:AG53181A % makeBaseApp.pl -i -t ioc AG53181A The following target architectures are available in base: linux-x86 linux-x86_64 What architecture do you want to use? linux-x86_64 The following applications are available: AG53181A What application should the IOC(s) boot? The default uses the IOC's name, even if not listed above. Application name?
configure/RELEASE編集
pfrproc2:AG53181A % vi configure/RELEASE SNCSEQ=$(EPICS_BASE)/../modules/soft/seq/2.0.11 ASYN=$(EPICS_BASE)/../modules/soft/asyn/4-11 STREAM=$(EPICS_BASE)/../modules/soft/stream/2-5
srcディレクトリでの作業
pfrproc2:AG53181A % cd AG53181AApp/src registrar(drvAsynIPPortRegisterCommands) registrar(drvAsynSerialPortRegisterCommands) registrar(vxi11RegisterCommands) pfrproc2:AG53181A % vi Makefile AG53181A_DBD += aaiRecord.dbd AG53181A_DBD += aaoRecord.dbd AG53181A_DBD += asyn.dbd AG53181A_DBD += stream.dbd AG53181A_DBD += AG53181.dbd AG53181A_LIBS += asyn AG53181A_LIBS += stream
Dbディレクトリでの作業
pfrproc2:AG53181A % cd AG53181AApp/Db/ プロトコルファイル作成 pfrproc2:Db % vi AG53181.proto Terminator = CR LF; # getIDN { out "*IDN?"; in "%39c"; } データベース作成 pfrproc2:Db % vi test.db record(stringin, "obina:idn") { field(DESC, "get IDN") field(DTYP, "stream") field(INP, "@AG53181.proto getIDN PS1 22") <---- GPIB機器のアドレスが22の場合 } pfrproc2:Db % vi Makefile DB += test.db pfrproc2:Db % cd ../ pfrproc2:AG53181A % make
startup script編集
pfrproc2:AG53181A % cd iocBoot/iocAG53181A/ pfrproc2:iocAG53181A % vi st.cmd dbLoadRecords("db/test.db") vxi11Configure ("PS1","172.28.xxx.yyy",1,1000,"inst0",0) <---- LAN/GPIBゲートウェイのIPアドレス
Last modified 11 years ago
Last modified on 07/24/13 17:05:45